19
BLUETOOTH SPEAKER
The XP9 Hoverboard has a powerful built-in wireless speakers so
you can play your music while riding.
1. Ensure your XP9 Hoverboard is turned off. If it is not, please turn it off
first before pairing.
2. Turn on your XP9 and the speakers will announce that it’s waiting for
a Bluetooth connection. This will indicate your XP9 speaker is now in
pairing mode.
3. Place the XP9 and the Bluetooth device to which you would like to
pair it within the operating distance. We recommend keeping the two
devices no further than 3 feet apart during pairing.
4. Ensure Bluetooth is enabled on your phone or music device. Refer to
manufacturer’s instructions for how to enable Bluetooth on your device.
5. Once you have activated Bluetooth on your device, select the option
from the list of available Bluetooth devices.
6. Please note, pairing mode on the XP9 will last for two minutes. If no
devices are paired after two minutes, the XP9 speaker will automatically
return to standby mode.
7. If pairing is unsuccessful, turn off the XP9 first and repair following the
aforementioned steps.
NOTE: Once you have paired the XP9 speaker with a device, the
speaker will remember this device and will pair automatically when the
device’s Bluetooth is activated and in range. You can reconnect a
previously paired device without going through the pairing or PIN
process on up to two devices.
Once the XP9 Bluetooth speaker is paired to your device, you can
stream music wirelessly through it. Select the track you wish to listen to
on your device to listen via the speakers. All volume and track controls
will be made using your music device.
PAIRING THE SPEAKER
LISTENING TO MUSIC
To Next Page
Loading...
