Everdure Lumina II Series - User Manual

1
Operating and maintenance instructions for
Everdure Lumina Series II
Australian made by:
Everdure
A Division of Shriro Australia Pty Limited
101 Sheffield Road, Welshpool, Western Australia, 6106
SHRIRO AUSTRALIA PTY. LIMITED
23-27 CHAPLIN DRIVE, LANE COVE, NSW 2066
Telephone: 1300 766 066
FOR PEACE OF MIND AND THE HIGHEST LEVEL OF AFTER SALES
SERVICE, REGISTER YOUR PRODUCT ON: www.everdure.com -
(Refer to the Everdure Product Warranty Registration Form on this
manual)
EVB 0480
IMPORTANT
PLEASE READ THESE INSTRUCTIONS CAREFULLY
BEFORE USING YOUR NEW EVERDURE HEATER

Summary

Important Initial Checks

General Requirements

Data Label and Important Information

Gas Supply

Instructions for connecting and disconnecting the gas supply.

Electrical Supply

Guidance on connecting the heater to the electrical power supply.

Controls Overview

Description of Operation

Heater Functions and Features

Safety Features

Key safety mechanisms like child lock, tilt switch, and over-temperature sensor.

Important Warnings and Dimensions

Heater Operation Instructions

Setting Up the Heater

Steps for turning on the heater, setting time, and desired temperature.

Sleep Timer and Fault Messages

Sleep Timer

Control Panel Fault Messages

Information on displayed fault messages and initial troubleshooting.

Additional Faults and Warnings

Minimum Room Size Warning

Fault Finding Guide

Warranty Information

Product Warranty Registration

Everdure Lumina II Series Specifications