Everest EGC 50 A - User Manual

VALID FOR UNITS PRODUCED SINCE SEPTEMBER/2015
ICE CUBE MACHINES
EGC 50 A
EGC 75 A
EGC 100 A / 150 A EGC 150 MA
EGC 150 MA / 140 EGC 150 MA / 250 EGC 300 MA / 250
SINCE 1966
TECHNICAL MANUAL
MARÇO/2017 REV.170331

Summary

Important Information

Typical Installation Diagram

Operating Principles

Cleaning Cycle

Details the process of cleaning the ice machine's internal components.

Ice Formation Cycle

Ice Detachment Cycle

Scheduled Maintenance

Items to Check During Maintenance

Electrical;Electronic Part

Electrical Diagram EGC-50 A, EGC-75 A, EGC-100 A - 127 V

Electrical Diagram EGC-50 A, EGC-75 A, EGC-100 A - 220 V

Electrical Diagram EGC-150 A, EGC-150 MA - 127 V

Electrical Diagram EGC-150 A, EGC-150 MA - 220 V

Electrical Diagram for Tecumseh Compressors

Electrical Diagram for Embraco Compressors

Equipment Failure Management

2.1 - Machine Does Not Work

Troubleshooting steps for when the ice machine fails to operate.

2.2 - Water Shortage or Low Water Flow

Addresses issues related to insufficient water supply or flow rate.

2.3 - Water Trough Goes Up and Down Continuously

2.4 - Continuous Entrance of Water in the Trough

2.5 - Low Ice Production

2.6 - Machine Working But Not Producing

2.7 - Cubes Do Not Detach From the Evaporator

3 - Adjustment and Replacement of Main Components

3.1 - Displacement System and Trough

3.2 - Adjustment of Water Level and Ice Cube Height

3.3 - Finned Axis

3.4 - Circuit Board

3.4.1 - Circuit Board Does Not Control Any Component

3.4.1 A - Components That Send Information to the Board

3.4.1 B - Components Controlled by the Circuitboard

3.5 - Inoperative Water Valve

3.6 - Gas Load; Replacement of the Cooling Compressor

Everest EGC 50 A Specifications

General

Brand	Everest
Model	EGC 50 A
Category	Ice Maker
Language	English