Need help?Do you have a question about the EverExceed 6K and is the answer not in the manual?
General| Model | EverExceed 6K |
|---|---|
| Category | UPS |
| Frequency | 50/60 Hz |
| Battery Voltage | 192VDC |
| Input Voltage | 230/240 VAC |
| Output Voltage | 230/240 VAC |
| Waveform | Sinewave |
| Battery Type | Sealed Lead-Acid (SLA) |
| Communication Interface | RS232, USB |
| Operating Temperature | 0°C to 40°C |
| Humidity | 95% non-condensing |
Explains UPS operation when utility power fails, drawing from the battery.
Outlines the different operating modes of the UPS system.
Provides general specifications including power rating, voltage, current, and dimensions.
Details electrical performance parameters like input voltage, frequency, and power factor.
Specifies output voltage regulation, power factor, distortion, overload capacity, and crest ratio.
Provides instructions for connecting the UPS to power sources.
Details the procedure for connecting external batteries for extended UPS backup.
Explains how to connect multiple UPS units in parallel for increased capacity or redundancy.
Details the functions of control buttons and status indicators on the UPS panel.
Explains the functions of the ON/OFF and FUNC buttons.
Describes the meaning of REC, INV, and BYP status indicators.
Details how to turn the UPS on and off in various operational modes.
Step-by-step guide for starting the UPS in normal operating mode.
Instructions for starting the UPS using battery power when utility is unavailable.
Procedures for safely shutting down the UPS from normal mode.
How to turn off the UPS when it is operating in battery mode.
Step-by-step instructions for safely replacing the UPS battery modules.
To Next Page