Everflo EF2200-QA User Manual

Installation
10
assembly
working condition:
2. Test with
water
Test the system for leaks with water:
a) Fill the tank with water.
b) The pump is an “on demand” pump. When turned on, the pump will
prime itself, then turn off once reaching pressure. When the flow
continues, the pump will automatically re-start.
c) Check for leaks throughout the system. If a leak is detected, fix the leak
and re-test the system with water.

Everflo EF2200-QA Specifications

General

Brand	Everflo
Model	EF2200-QA
Category	Water Pump
Language	English