CHAPTER2 INSTALLATION
4
Installation
EverAccess Proximity Readers should be installed by qualified installation
professionals. The installation procedures described below are recommended
guidelines, but all local, state, and national electrical codes take precedence.
Please refer to the following diagram for the wiring connections and mounting
instruction.
Wiring Connections
Table 2.1. Reader wires’ definition
Color Functionality
Red Power supply 6.5 ~ 18 V DC
Black GND
Green Data 0 (Wiegand)
Brown Data 1 (Wiegand)
Blue Specialized RS-232 TX
Gray Specialized RS-232 RX
Yellow For control purpose, as the power supply is 5~12V
the yellow led indication lights up
Orange Anti-tamper Switch
Violet Anti-tamper Switch
Chapte
To Next Page
Loading...
