4
ABOUT YOUR WATER HEATER
WATER HEATER APPLICATION
This water heater is designed for use in a single family domestic dwelling for
the purpose of heating potable water. Its use in an application other than this
may shorten its life.
MODEL TYPE
The Everhot
®
water heater model you have chosen is suitable for outdoor
installation only. This model is a 5 star gas water heater.
Water is stored in a vitreous enamel lined
steel cylinder and heated by a gas burner
located under the cylinder. The heat produced
by the burner is transferred to the water
through the base, top and wall of the cylinder
and through the wall of a flue pipe which
passes through the centre of the cylinder. The
gas supply to the burner is controlled by the
thermostat so the water is heated to a
constant temperature.
Automatic safety controls are fitted to the
water heater to provide safe and efficient
operation.
MAINS PRESSURE
The water heater is designed to operate at mains pressure by connecting
directly to the mains water supply. If the mains supply pressure in your area
exceeds that shown on page 25, a pressure limiting valve must be fitted. The
supply pressure should be greater than 350 kPa for true mains pressure
operation to be achieved.
To Next Page
Loading...
