3
38
58
62
1
6264
70
7
For queries or additional product information, please call our Service Centre on:
087 997 0865
Please have your model name on hand.
www.everlast.com
ASSEMBLY INSTRUCTIONS
STEP 2
1. Remove 6pcs x Hexagon Bolt (62), 4pcs x Curve Washer (64) and 2pcs x Flat Washers (58) from the tube of
Main Frame (1). Remove bolts with S6 Allen Wrench provided.
2. Connect the Sensor Wire (70) from the Main Frame (1) to the Extension Sensor Wire (38) from the Meter Post
(3).
3. Insert the Meter Post (3) onto the tube of Main Frame (1) and secure with 6pcs x Hexagon Bolt (62), 4pcs
x Curve Washer (64) and 2pcs x Flat Washer (58) that were removed. Tighten bolts with S6 Allen Wrench
provided.
To Next Page
Loading...
