E-20 Prefilter System
Prefilter System for foodservice applications
E-20 Prefilter System: EV9795-90
EC210 Prefilter Cartridge: EV9534-26
E-20 Prefilter System: EV9795-90
EC210 Prefilter Cartridge: EV9534-26
Filters out larger dirt and rust particles
Extends the life of primary filter cartridges
Tightly spun EC210 sediment cartridge delivers
10 micron nominal filtration
Durable slim bowl design makes cartridge change
outs easy to handle
Clear housing lets you visually inspect trapped
particles and makes determining when to change
the cartridge easy
20" bowl design accepts most 10" drop in
cartridges
Choose a mounting location suitable to support
the full weight of the system when operating
Make sure to properly lubricate O-ring prior to
use
Use 3/4” water line (Optional reducer bushings
included)
Install vertically with bowl hanging down
Allow 2-1/2” clearance below the cartridge for
easy cartridge replacement
Inspect EC210 cartridge periodically to determine
dirt load
Replace EC210 cartridge when dirt has penetrated
through to the inner core of the cartridge
Do not exceed service flow rate
Inspect O-ring during each cartridge change.
Lubricate and/or replace if necessary
For all foodservice applications requiring
prefiltration
High sediment areas
EV9795-90
To Next Page
Need help?
General
