Do you have a question about the Everpure MH2 EV9613-21 and is the answer not in the manual?
Model | MH2 EV9613-21 |
---|---|
Brand | Everpure |
Filter Type | Carbon Block |
Micron Rating | 0.5 micron |
Application | Commercial |
Pressure Requirements | 10 - 125 psi |
Operating Pressure | 10 - 125 psi (0.7 - 8.6 bar) |
Temperature Range | 35 - 100°F |
Operating Temperature | 35 - 100°F |
Inlet/Outlet Size | 3/8 inch |
Reduces | Chlorine, Taste, Odor |
Filter Life | 6 months |
Product Type | Water Filter System |
Micro-Pure II media with AgION™ antimicrobial protection inhibits bacterial growth.
Provides clear, fresh water for consistently great tasting coffee and beverages.
Activated carbon blend reduces chlorine taste and odor and other contaminants.
Self-contained scale inhibitor feed prevents limescale from forming in brewing equipment.
Reduces asbestos fibers and Cryptosporidium and Giardia cysts.
NSF Certified under NSF/ANSI Standards 42 for aesthetic effects and mechanical filtration.
Install vertically, allow clearance for replacement, and flush filter for three minutes.
Change cartridges every 6 months or when capacity/pressure dictates; flush after changes.
For coffee applications and high flow, higher volume coffee urns.
Rated capacity of 9,000 gallons (34,068L) or 18,000 pots.
Details overall dimensions, service flow rate, pressure requirements, and temperature range.
Do not use with microbiologically unsafe water without adequate disinfection.
Filter cartridges covered by a limited one-year warranty against defects.
Tested and certified for reduction of aesthetic effects and health effects contaminants.