Everpure IN-12 EV9100-07 - User Manual

BENEFITS
APPLICATION/SIZING
INSTALLATION TIPS
OPERATION TIPS
IN-12 In-line Filter
Designed for superior taste and odor reduction
IN-12 with 1/4” JG fittings: EV9100-86
IN-12 without fittings: EV9100-07
IN-12 with 1/4” JG fittings: EV9100-86
IN-12 without fittings: EV9100-07
Provides clear, fresh, quality ingredient water for
coffee, espresso and ice applications
Granular activated carbon reduces chlorine taste
and odor, which can cause coffee to taste bitter
Inhibits the formation of limescale, which can
shorten the life of equipment
In-line design is compact and installs out of sight
behind equipment
Available with quick disconnect fittings which
make installation fast and simple
NSF Certified under NSF Standards 42 for taste
and odor reduction
Use 1/4” water line
Flush IN-12 cartridge by running water through
filter for three minutes at full flow
Change cartridges on a regular 6 month
preventative maintenance program
Change cartridges when capacity is reached or
when pressure falls below 10 psi
Service flow rate must not exceed 0.75 gpm
Always flush the filter cartridge at time of
installation and cartridge change
For medium volume, single pot coffee brewers
with flow rates up to 0.75 gpm
Capacity: 4,800 gallons (18,170 L)
EV9100-07

Summary

EV9100-07 IN-12 In-line Filter Overview

Product Benefits

Provides clear, fresh water for coffee, espresso, ice; reduces chlorine taste, odor; inhibits limescale.

Installation and Operation Tips

Use 1/4" line, flush cartridge for 3 mins. Change every 6 months or when capacity/pressure drops.

Application and Sizing

For medium volume coffee brewers up to 0.75 gpm. Capacity: 4,800 gallons.

Technical Specifications and Warranty

Specifications

Details dimensions, connections, flow rate, pressure, temperature, weight, and NSF certification.

Warranty Information

Covers filter systems for five years and replaceable elements for one year against defects.

Everpure IN-12 EV9100-07 Specifications

General

Model Number	EV9100-07
Model	IN-12
Brand	Everpure
Category	Water Dispenser
Filter Type	Carbon Block
NSF Certified	Yes
Type	Inline Filter
Nominal Filtration Rating	0.5 microns
Pressure Requirements	10 - 125 psi (0.7 - 8.6 bar), non-shock
Temperature Range	35 - 100°F (2 - 38°C)
Operating Temperature	35°F - 100°F
Inlet/Outlet Size	3/8 inch
Connection Size	3/8 inch
NSF/ANSI Certifications	NSF/ANSI 42
Reduces	Chlorine