22
Eversense 365 CGM System Quick Reference Guide
1. On the Warm-Up Complete
notification, tap Continue to
begin the Initialization Phase.
2. Tap on Placement Guide.
Until the transmitter is secured over the sensor and
a signal is established, the Placement Guide screen
will show No signal.
Once the Warm-Up Phase has ended, the Initialization Phase begins, and you're ready to start
wearing the smart transmitter. For the first few days, you'll wear the smart transmitter over the
Tegaderm™ bandage. Always start with a freshly charged smart transmitter.
To Next Page
Loading...
