19
Eversense 365 CGM System Quick Reference Guide
The sensor requires a 24-hour Warm-Up Phase to stabilize in your body before glucose values will
be collected by the smart transmitter. During the Warm-Up Phase, you do not need to wear the
smart transmitter. Once the Warm-Up Phase is complete, you will receive a notification to let you
know that you can continue with the next step in your system setup. At that time, you can turn ON
the smart transmitter and place it over the sensor with the adhesive patch. The system will prompt
you to calibrate using the app.
Warm-Up Phase
Warning: The system will not provide readings during the 24-hour Warm-Up Phase and until
a second calibration is successful during the Initialization Phase. During this time, you should
monitor your glucose using a home blood glucose monitor.
To Next Page
Loading...
