13
Eversense E3 CGM Quick Reference Guide
Daily Transmitter Wear and Calibrating the System
2. Remove the larger clear backing and
position the smart transmitter directly
over the sensor.
. Peel o the paper backing with the
Eversense logo on it and place the
smart transmitter in the center.
Once the Warm-Up Phase has ended, the Initialization Phase begins, and you're ready to start
wearing the smart transmitter. For the first few days, you'll wear the smart transmitter over the
Tegaderm™ bandage. Always start with a freshly charged smart transmitter.
Daily Transmitter Wear
To Next Page
Loading...
