15
Eversense E3 CGM Quick Reference Guide
About 10 minutes after Initialization Phase begins, the system
will display the Calibrate Now Notification.
• Do a fingerstick blood glucose check.
Tap Calibrate on the notification and enter the glucose
value into the app.
• You will receive three more calibration prompts during
initialization, each 2 hours after the previously completed
calibration. You can complete all 4 calibrations in as quickly as
6 hours. All 4 calibrations must be completed within 36 hours.
You can record the times below as a reference.
Initialization Phase
Calibration times for initialization
Warm-Up Phase ends: ____________________________
#
1 _____________ AM/PM
#
2 _____________ AM/PM*
#
3 _____________ AM/PM
#
4 _____________ AM/PM
*Glucose data available after 2nd calibration
To Next Page
Loading...
