14
Eversense E3 CGM Quick Reference Guide
4. Press the adhesive
patch firmly on skin
surface over the
sensor.
5. Use the tab to pull
o the remaining
clear liner.
3. Check the connection between the
smart transmitter and the sensor.
Select Placement Guide from
the Main Menu drop-down to help
you determine where to place your
smart transmitter.
Slide the smart transmitter over the
sensor insertion area until you get
a good or strong signal on the app.
Note: For more information on using the Placement Guide,
review Placement Guide - Show More Detail Screen in the
Linking the Sensor section of the Eversense E3 CGM System
User Guide.
To Next Page
Loading...
