2
Eversense E3 CGM Quick Reference Guide
Eversense E3 Smart Transmitter
Your rechargeable smart transmitter
powers the sensor, calculates glucose
readings, and stores and sends data to the
app. It also provides on-body vibe alerts.
The smart transmitter is secured to your
skin with a disposable adhesive patch that
is changed daily.
Turn the Smart Transmitter ON and OFF
To turn the smart transmitter ON, press and hold the power button for about five seconds.
To turn the smart transmitter OFF, press and hold the power button for about five seconds.
To see if your smart transmitter is ON, press the power button once. If the LED appears, the smart
transmitter is ON. If no LED appears, the smart transmitter is OFF.
Wearing the Smart Transmitter
Power
button
LED indicator
(lights green
or orange)
Top Back
Charging contact pins
• Replace the adhesive patch on your
smart transmitter daily.
• The smart transmitter can be removed
and reapplied to the skin at any time.
Note: Your smart transmitter is water
resistant (IP67) to a depth of 1 meter
(3.2 feet) for up to 30 minutes.
To Next Page
Loading...
