Eversol TL1500AS - LCD Display

6 Operating Instructions
3.3 LCD display
A backlight LCD display is integrated in the cabinet of the Eversol inverters so that
it is easily visible. The display consists of 16 characters and 2 lines. The bottom line
(Line 2) always displays the output power (Pac = xxxW). The top line (Line 1)
shows current state information by default, and by pressing function key it will
display different operating information as follows:
Line 1
State information
Current state information: all possible content shows
in the following table
E-today
The energy generated today in kilo watt hours (kWh)
E-total
The energy generated since starting up the inverter
(kWh)
Vpv
The present voltage of the solar generator
Ipv
The present current of the solar generator
Iac
The present grid current
Frequency
The grid Frequent
Model
The type of the inverter
Ver
The Firmware version
SetLanguage
Several languages provided and you can select one
you require
Vac
The grid voltage
Line 2
Pac = xxx W
The current output power (W)