8 Operating Instructions
3.4 Function key
The Eversol has a function key which is necessary to switch between the different
displays, entering next level and locking.
Press the key once, it displays next information. The menu is continuous, if you are
at the last entry of a menu, the first entry will be displayed on LCD when you press
the key again.
If you don’t press the key for approx. 10 second, it will display the state information
again and keep on.
3.4.1 Setting the Language
The Eversol provides several languages.
At the entry of “SetLanguage”, press the key for approx. 5 seconds, you can enter
the language menu.
Select the language which you require with the function key.
Keep this state without any operation. When it returns to the main menu
automatically, the setting is saved.
3.4.2 LOCK
If you want to freeze the display during normal operation, you can press the key for
a few seconds when it display the entry you desire. Release the key until you see
“LOCK”. Then it always shows the selected entry until you press the key again or
the working state of the inverter changes.
3.4.3 LCD Backlight control
To save power, the backlight of LCD display automatically turns off after 20
seconds. To enable it, press the key again.
To Next Page
Loading...