To Next PageTo Next Page
Need help?Do you have a question about the evertz EQT-1602-3G-CS and is the answer not in the manual?
Details technical specifications for EQT routers, including configuration, signals, and connectors.
Describes router configurations, chassis sizes, and input/output capabilities.
Explains router control options, including remote panels and third-party external control.
Details the internal power supply and optional redundant power supply for the EQT router.
Covers router bandwidth, signal detection, and fiber version capabilities up to 3Gb/s.
Lists general features common to all EQT router versions, including SDI compatibility and modular architecture.
Details features specific to the EQT -CS versions, such as genlock and SoftSwitch™ audio.
Covers physical installation aspects for router frames and remote panels.
Details mounting requirements for router frames in standard 19-inch equipment racks.
Explains how remote panels are designed for 19-inch racks and can be mounted at any angle.
Details various electrical connection types including video, fiber, serial, and Ethernet.
Covers connections for analog and digital video signals using standard BNC connectors.
Details LC fiber connector connections for single mode fiber inputs and outputs.
Covers the rear panel DB9 female serial connector for Quartz(-1) protocol commands.
Details the Micro-D male serial connector for accessing module menus via breakout cable.
Explains the RJ-45 network connector for system monitoring and control via Ethernet.
Guides connection to Ethernet networks using 10/100/Gigabit twisted pair cabling.
Explains the analog reference requirement for synchronized crosspoint changes.
Provides steps for upgrading firmware on standard EQT routers via a web browser.
Details upgrading -CS EQT versions and control panel components using FTP.
Outlines upgrading EQTs with firmware prior to 1.0 build 001 using FTP and Telnet.
Details technical specifications for EQT routers, including configuration, signals, and connectors.
Describes router configurations, chassis sizes, and input/output capabilities.
Explains router control options, including remote panels and third-party external control.
Details the internal power supply and optional redundant power supply for the EQT router.
Covers router bandwidth, signal detection, and fiber version capabilities up to 3Gb/s.
Lists general features common to all EQT router versions, including SDI compatibility and modular architecture.
Details features specific to the EQT -CS versions, such as genlock and SoftSwitch™ audio.
Covers physical installation aspects for router frames and remote panels.
Details mounting requirements for router frames in standard 19-inch equipment racks.
Explains how remote panels are designed for 19-inch racks and can be mounted at any angle.
Details various electrical connection types including video, fiber, serial, and Ethernet.
Covers connections for analog and digital video signals using standard BNC connectors.
Details LC fiber connector connections for single mode fiber inputs and outputs.
Covers the rear panel DB9 female serial connector for Quartz(-1) protocol commands.
Details the Micro-D male serial connector for accessing module menus via breakout cable.
Explains the RJ-45 network connector for system monitoring and control via Ethernet.
Guides connection to Ethernet networks using 10/100/Gigabit twisted pair cabling.
Explains the analog reference requirement for synchronized crosspoint changes.
Provides steps for upgrading firmware on standard EQT routers via a web browser.
Details upgrading -CS EQT versions and control panel components using FTP.
Outlines upgrading EQTs with firmware prior to 1.0 build 001 using FTP and Telnet.
General| Brand | evertz |
|---|---|
| Model | EQT-1602-3G-CS |
| Category | Network Router |
| Language | English |
