Need help?Do you have a question about the EVERVIEW EV2001SD and is the answer not in the manual?
Read all warnings carefully before installation. Contact installer if unsure. Do not install if parts are missing or damaged.
Product may contain moving parts. Use with caution. Do not exceed maximum weight capacity. Ensure TV size is compatible.
Includes lag bolts and washers (A1, A2) for secure wall mounting to studs.
Various screws, washers, and spacers (B1-B3, C, D1-F2) for attaching TV to the mount.
Measure TV VESA pattern and check screw lengths for proper fit and thread depth.
Instructions for attaching brackets to TVs with a flat back panel using specific hardware.
Instructions for TVs with curved backs or requiring extra spacing using specific hardware.
Use a stud finder to locate wood studs and mark their centerlines for accurate mounting.
Drill four 7/32 in. pilot holes to a depth of at least 2 3/8 inches for mounting.
Secure the wall plate using lag bolts and washers with a socket wrench.
Hang the TV onto the brackets and engage the locking mechanism to secure it.
Fine-tune the TV's angle to achieve a +/-3 degree level adjustment using a metric wrench.
Modify the nut hardness on both sides if the mount does not tilt freely.
General| VESA Compatible | Yes |
|---|---|
| Material | Steel |
| Color | Black |
| Tilt Range | -5° to +15° |
| Swivel Range | ±45° |
| Mounting Type | Wall |
| VESA Compatibility | 200x200mm |
To Next Page
