Everwell MRTH - Operating Modes: Feel and Sleep; Feel Mode Operation; Sleep Mode Operation

OPERATING INSTRUCTIONS
Ambient temp
Auto temp.
20
23
23
26
20 ~26
Oper ation mode
H E AT IN G ( F OR H E AT P UM P T Y PE )
DRY
COOL
18
FA N (F OR C OOL ONLY T Y PE )
To optimize the function of the air conditioner, adjust
the temperature(only 2 )(1), the speed (2) and the
direction of the air ow (3) by pressing the buttons
indicated
To activate the SLEEP mode of operation, press the
SLEEP button on the remote controller until the sym-
bol (AUTOQUIET ) appears on the display.
A U T O QU I E T
The function SLEEP automatically adjusts the
temperature to make the room more comfortable
during the night . In cooling or dry mode , the set
temperature will automatically raise by1 every
60 minutes, to achieve a total rise of 2 during the
rst 2 hours of operation.
In heating mode the set temperature is gradually
decreased by 2 during the rst 2 hours of operation.
After 10 hours running in sleep mode the air conditio-
ner is swicthed o automatically.
15
FEEL MODE
POWER SLEEP
TIMER
RUN
Indoor display
FEE L
OFF
ON
C
AUTOQUIET
POWE R FUL
hr
DELAY
TIMER
HEALTHY
AIR
SWING
FAN
SPE ED
DRY
FAN
HEAT
COOL
FEE L
C
h
ON
ON/OFF
MODE TIME R
FAN SPEED SUPER E CO
SWING SLE EP HEALTHY
ANTI-MILDEW
1
2
3
OFF
ON
C
AUTOQUIET
POWER FUL
hr
DELAY
TIMER
HEALTHY
AIR
SWING
FAN
SPE ED
DRY
FAN
HEAT
COOL
FEE L
C
h
ON
ON/OFF
MODE TIME R
FAN SPEED SUPER E CO
SWING SLE EP HEALTHY
ANTI-MILDEW
AUTOQUIET
SLEEP MODE
1
.
.
TIMER
HEALTHY
TIMER
HEALTHY
FEEL
Automatic mode.
To activate the FEEL (automatic) mode of operation,
press the MODE button on the remote controller until
the symbol ( FEEL ) appears on the display.
In FEEL mode the fan speed and the temperature
are set automatically according to the room temperature
(tested by the temperature sensor which is incorporated
in the indoor unit).