Need help?Do you have a question about the EVGA CLCx Series and is the answer not in the manual?
General| Brand | EVGA |
|---|---|
| Model | CLCx Series |
| Category | Accessories |
| Language | English |
The main CLCx radiator unit, available in 360mm, 280mm, or 240mm sizes.
The LCD display module and its connecting USB cable for customization.
M3 threaded standoffs for LGA 12XX/115X and LGA 17XX sockets.
Standoffs and collars for AMD AM5/AM4 sockets using UNC 6-32 thread.
Pre-installed retention bracket for Intel LGA 17XX, 12XX, 115X sockets.
Retention bracket for AMD AM5/AM4 sockets.
The backplate used for Intel socket installations.
Various screws (M3, UNC 6-32) and nuts for securing components.
30mm and 20mm UNC 6-32 screws for fan and radiator mounting.
Washers used with fans to help isolate vibration.
Includes ARGB fans and sleeves for cable management.
PWM fan splitter and 16-pin cable for connecting fans and ARGB.
A tool provided for tightening screws during installation.
Install the backplate and standoffs on the motherboard for Intel sockets.
Attach retention ring, align pump with standoffs, and secure to CPU.
Mount fans to radiator and radiator to case, ensuring pump is lower than radiator.
Align and press LCD cap onto the pump, then connect the USB cable.
Connect USB, SATA power, fan PWM, and ARGB cables for pump and fans.
CLCX is a self-contained, leak-tested AIO cooler; no coolant is needed.
Details the 5-year limited warranty and installation liability.
To Next Page
