Need help?Do you have a question about the EVGA CLCx 360 and is the answer not in the manual?
General| Brand | EVGA |
|---|---|
| Model | CLCx 360 |
| Category | Accessories |
| Language | English |
Lists the main cooler unit (A) and LCD cap with USB cable (B).
Details standoffs for Intel LGA 12XX/115X (C) and LGA 17XX (D) sockets.
Provides standoffs and collars for AMD AM5/AM4 sockets (E).
Instructions for installing the mounting backplate (H) onto the motherboard.
Guidance on screwing standoffs (C, D, E) into the backplate for Intel/AMD.
Ensuring the correct retention ring (F for Intel, G for AMD) is on the pump.
Aligning the pump with standoffs and securing it with screw nuts (I).
Attaching fans to the radiator and radiator to the case using screws (J, K).
Pump should always be below the highest point of the radiator for optimal performance.
Aligning and pressing the LCD cap onto the pump's indents and latch.
Connecting the LCD panel's USB cable to the motherboard's USB 2.0 header.
Connecting the 16-pin cable (O) to the pump, SATA power, and motherboard headers.
Utilizing PWM splitter (N) and 16-pin cable (O) for fan and ARGB control.
EVGA CLCX is a self-contained, leak-tested AIO cooling system.
Provides information on the 5-year limited warranty and installation liability.
To Next Page
