EVGA GeForce GTX Series User Manual

2-way SLI: Install your second GeForce
®
graphics card in the secondary PCIe x16 slot.
Connect the two cards together using a 2-way SLI bridge.
NVLink
TM
technology is only supported by each GPU Specification.
Install your first GeForce
®
graphics card into the Primary PCIe x16 slot
(the Primary slot is the one closest to the CPU).
Attention: It is very important that you wait until the graphics card has cooled down before taking the card out of the system.
1.
Remove the slot covers that correspond to the PCIe slots you are installing the GeForce
®
graphics card in
(if there was no existing graphics card).
2.
Note : All of the graphics cards in an SLI
®
configuration must be identical.
Install the GeForce
®
graphics card, as shown below. If this card is going into an SLI
®
configuration, follow the
directions for the number of cards you will be installing.
3.
Hardware Installation

EVGA GeForce GTX Series Specifications

General

Brand	EVGA
Model	GeForce GTX Series
Category	Video Card
Language	English

Summary

Hardware Installation

First GPU Installation

Install your first GeForce graphics card into the primary PCIe x16 slot, closest to the CPU.

SLI Configuration

Install a second GeForce graphics card in the secondary PCIe x16 slot for 2-way SLI.

Connecting to Display and System

Display Connection

Connect your display(s) to the graphics card for output.

System Power Reconnection

Reconnect your computer's power cord after hardware installation.

Driver Installation Procedure

Power Up and Driver Download

Power up the PC and download the latest driver file from www.evga.com/drivers.

Driver Setup and Reboot

Follow the setup program for installation and reboot if necessary.

System Requirements and Contents

Minimum System Requirements

Lists required motherboard, power supply, and operating system specifications.

Included Equipment

Details the items included in the EVGA GeForce graphics card box.