EVGA GEFORCE GTX User Manual (English)

To Next Page

2-way SLI: Install your second GeForce

graphics card in the secondary PCIe x16 slot.

Connect the two cards together using a 2-way SLI bridge.

NVLink

technology is only supported by each GPU Speciﬁcation.

Install your ﬁrst GeForce

graphics card into the Primary PCIe x16 slot

(the Primary slot is the one closest to the CPU).

Attention: It is very important that you wait until the graphics card has cooled down before taking the card out of the system.

Remove the slot covers that correspond to the PCIe slots you are installing the GeForce

graphics card in

(if there was no existing graphics card).

Note : All of the graphics cards in an SLI

conﬁguration must be identical.

Install the GeForce

graphics card, as shown below. If this card is going into an SLI

conﬁguration, follow the

directions for the number of cards you will be installing.

Hardware Installation

Questo manuale d’istruzione è fornito da trovaprezzi.it. Scopri tutte le offerte per Evga GeForce GTX 1660 Ti

SC Ultra Gaming 6GB o cerca il tuo prodotto tra le migliori offerte di Schede Grafiche

Need help?

Do you have a question about the EVGA GEFORCE GTX and is the answer not in the manual?

EVGA GEFORCE GTX Specifications

General

Chipset Manufacturer	NVIDIA
Outputs	Varies by model (e.g., DVI, HDMI, DisplayPort)
DirectX Support	12
OpenGL Support	4.5
Memory Size	Varies by model (e.g., 2GB, 4GB)
Memory Type	GDDR5
Interface	PCIe 3.0 x16
Core Clock	Varies by model (e.g., 10
CUDA Cores	Varies by model (e.g., 768)
Memory Interface	Varies by model (e.g., 192-bit)
Power Connectors	Varies by model (e.g., 6-pin)
Thermal Design Power (TDP)	Varies by model (e.g., 120W)
SLI Support	Yes
Cooling	Varies by model (e.g., single fan, dual fan)
Length	Varies by model