Features
Installation
1. Remove the power supply from its packaging.
2.
The EVGA SuperNOVA XC Series has outstanding electrical performance with ultra stable voltage and extremely
clean power output. This can help you achieve the highest possible overclock (optional) and provide the most
stable and reliable power to all components. The EVGA SuperNOVA XC also has high eciency up to 90% (115V~)
/ 92% (230V~) eciency and is 80 PLUS
®
GOLD certified.
STABLE POWER
03
ECO THERMAL CONTROL SYSTEM
The EVGA ECO Intelligent Thermal Control System provides silent operation at low loads, improved eciencyand
longer life span of the fan. Enabled by a simple switch directly on the power supply, the “No Fan Spin” feature is
ideal for users looking to reduce ambient noise overall. Save on energy costs and unnecessary fan usage with the
EVGA ECO Thermal Control System.
TOP QUALITY PROTECTIONS
The EVGA SuperNOVA XC Series comes equipped with the most comprehensive protection set possible, including
Over Voltage Protection (OVP), Under Voltage Protection (UVP), Over Power Protection (OPP), Short Circuit
Protection (SCP), Over Current Protection (OCP), and Over Temperature Protection (OTP). This product is also
covered by an exceptional 3-year warranty and EVGA’s legendary customer service and support.
SUPERIOR BUILD QUALITY
The EVGA SuperNOVA XC Series is built to the highest standards, using 100% Japanese capacitors rated at 105
degrees Celsius and high quality brand-name semiconductor components for the highest performance and
reliability. The Ultra Quiet 135 mm Fluid Dynamic Bearing fan provides adequate cooling to allow near silent
operation.
MODULAR DESIGN
Reduce clutter in the case, improve ambient temperatures with better airflow overall and provide a clean look to
any system. Modular PSU designs allow the user to disconnect the cables from the power supply side if they are
not needed for the specific configuration. This can help free up space inside the case and improve cable management
as well as airflow throughout the system.
ATX 3.0 with PCI-Express Gen 5.0 support
The EVGA SuperNOVA XC power supplies are built to the ATX 3.0 compliance standard and feature PCI-Express
Gen 5.0 support to power the latest graphics hardware. These power supplies utilize the 12VHPWR connector to
provide up to 600W output for the latest graphics card hardware, along with a 200% Total Power Excursion and
300% GPU Power Excursion for PCIe Gen 5.0 graphics cards.
(Optional) Using the provided PSU testing tool, connect the 24-Pin cable to the
PSU, then attach the testing tool to the 24-Pin cable. Connect the ATX power
cable to the PSU and plug the PWR cable into the outlet or surge protector/UPS
you plan to use. Once connected, turn the power switch to the ON position. (If
the ECO mode is set to ON, the fan will not spin)
Please note : If you are using a water cooling configuration, this testing tool
provides a simple, safe, option for bleeding/ draining/ testing water cooling
components without the need of a paperclip or other device.
To Next Page
Loading...
Need help?
General
