Eviant T4 Series - Display Options; Picture Menu

7
Getting Started (continued)
Quick Auto Scan
Press OK / AutoScan button and hold for 3 seconds. Auto Scan
Setup Wizard will display. Select the antenna type and then go
to the next step, Quick Auto Scan will start.
To exit during scanning, press Menu button and hold
for 3 seconds.
Display Options
Press MENU to enter the setup menu. Use the menu to adjust the picture, audio, channel and
other functions. Navigate the menus with VOL and VOL . Press MENU again to go back or
exit.
Picture Menu
Press the VOL VOL buttons to select.
Press the CH button to enter into Picture Menu.
Press the CH CH buttons to select the desired sub-menu.
Zoom Mode
Press the CH CH buttons to select Zoom Mode.
Press the VOL VOL buttons to select Cinema, Normal, Wide, Zoom.
Color Mode
Press the CH CH buttons to select Color Mode.
Press the VOL button to enter the Color Mode Selection
Press the VOL VOL buttons to select Personal, Normal,
Warm, Cool these four options.
In each option you can press CH CH to select R (Red),
G (Green), B (Blue).
Press the VOL VOL buttons to adjust the color values.