Evo EV524T - Manual Program Operation; Program Mode Operation

:,
.
:,
..
,
:,
..
c)
d)
e)
By Pressing mode key under manual mode you can enter into time count down
mode Time window lights up and indicates preliminary time 30:00. Press start to run
the machine
Press mode key under time count down mode enter into distance count
down mode Window lights up and indicates preliminary distance 1.0 Pressing speed +/-
you can set distance count down ranging 1.00-99.00-1.0-...;
Press mode key under distance count down mode you can enter into calories count
down mode Window lights up and indicates preliminary calories 50 Press speed +/-
or incline +/- you can set calories count down ranging 20-990CAL,,…;
: The window will display “END” after stopping the time countdown, distance countdown
and calories countdown program.
f)
4 Manual program operation
a)
)
c)
d)
e):
f)
g)
h)
I)
j)
.
:, 5,
;
:;
:, ;
:, ;
,;
:, ;
:.
“” ;
,,
,,
;
;
Press start key time count down seconds then treadmill will start to work with
initial speed 1km/h
b Press speed+/-, you can adjust speed
Press incline+/- you can adjust incline
Press stop you can stop treadmill at working state
Press quick speed key you can quickly adjust the speed you want
Press quick incline key you can quick adjust the incline you want
By pulling out safety key, you can stop the treadmill urgently Speed window indicates
E-07 and beeper warns a second
: When you set the time gradually decreases to zero speed slows down until stop
Time window indicates END beeper warns once a second then display turns back
to P0 state
: When you set the distance gradually decreases to zero, speed slows down until stop ,
distance window indicates END , beeper warns once a second , then display turns back to
P0 state
: When you set the calories gradually decreases to zero, speed slows down until stop ,
calories window indicates END , beeper warns once a second , then display turns back to
P0 state
5. Program mode
a):
b):
c):
d):
e):
f):
g):
h):
I
j):
k):
Press program key you can enter into automatic program
Press start key you can start treadmill at the speed of program set
Press speed+/-, you can adjust speed
Press incline you can adjust incline
Press quick speed key, you can quickly adjust the speed you want
Press quick incline key, you can quick adjust the incline you want
Every program has 10 segments every segment working time is 1/10 of set time
When transferring from one segment to another you ll hear 3 beeps.
Press stop key you can stop working the treadmill
When set time gradually decreases to zero, speed slows down until stop , beeper warns
a second , then display turns back to P0 state
Pulling out safety key, you can stop working treadmill urgently. Speed window display”---”
,.
,;
;
+/- , ;
;
;
,;
,'
): , ;
;
10