EVOCA Saeco IDEA RESTYLE DUO

To Next Page

Cleaning Guide

The dierent wash cycles listed below do not replace the need to disassemble the components for

regular sanizaon.

PERFORMING A WASH CYCLE

BREW GROUP WASH

Press the Menu buon on the control panel.

Enter password by pressing the UP or DOWN buons to select a number.

Press OK to select the menu opon required to perform the maintenance.

ACCESSING THE PROGRAMMING MENU

In the Programming Menu, select the “Maintenance” opon, then the GROUP RINSING submenu.

(The GROUP RINSING submenu can also be accessed by selecng Washing Menu under the “Technical” opon.)

Press on the OK buon (screen will display “PUT THE TABLET INTO THE GROUP”.)

Remove the brew group (screen will display “INS. BREW GROUP”.) (Fig. 1)

Insert a brew group cleaning tablet into the brew group.

Use only coee machine-specic products.

Follow the dosing direcons on the product packaging.

Reinstall the brew group (screen will display “CLOSE SERV. DOOR”), then close the door. (Fig. 2)

The machine will automacally start performing a wash cycle. Screen will display

“REMOVE THE GROUP AND RINSE IT WITH WATER” when wash cycle is completed.

Remove the brewer group (screen will display “INS. BREW GROUP”.) (Fig. 1)

Wash the brew group under running water.

Reinstall the brew group (screen will display “CLOSE SERV. DOOR”), then close the door. (Fig. 2)

When screen displays “RINSING COMPLETED PRESS OK”, press the OK buon.

Remove and empty the drip tray, then reinstall it. Do not drink this water.

Cafecon | Evoca recommends using CAFIZA tablets from Urnex, or equivalent cleaning product.

Make sure to always follow the product manufacturer’s instrucons.

This document describes the Saeco Conceptto Evo and Idearestyle coffee machines, focusing on their cleaning and maintenance.

Function Description

The Saeco Conceptto Evo and Idearestyle are coffee machines designed to brew various coffee beverages, including espresso and cappuccinos. They feature a user-friendly interface for programming and operation, and are designed for ease of maintenance through specific cleaning cycles and removable components.

Important Technical Specifications

While specific technical specifications like power consumption or water tank capacity are not detailed, the manuals highlight the machine's ability to dispense coffee, milk, and hot water. The Idearestyle manual mentions "CAFIZA tablets from Urnex" and "Milk System Cleaning Tablets from Evoca" as recommended cleaning products, suggesting the use of specialized cleaning agents for optimal performance and longevity. The Conceptto Evo manual also recommends "Milk System Cleaning Tablets from Evoca."

Usage Features

Programming and Menu Navigation: The Idearestyle machine features a programming menu accessible by pressing the Menu button. Users can enter a password (UP or DOWN buttons) to select a number, then press OK to select the menu option required to perform maintenance. This indicates a secure and structured approach to accessing maintenance functions.

Brew Group Washing Cycle (Idearestyle): The Idearestyle machine includes a "BREW GROUP WASH" cycle. To initiate this:

In the Programming Menu, select the "Maintenance" option, then the "GROUP RINSING" submenu. The "GROUP RINSING" submenu can also be accessed by selecting "Washing Menu" under the "Technical" option.
Press OK on the OK button (screen will display "PUT THE TABLET INTO THE GROUP").
Remove the brew group (screen will display "INS. BREW GROUP").
Insert a brew group cleaning tablet into the brew group.
Reinstall the brew group (screen will display "CLOSE SERV. DOOR"), then close the door. (Fig. 1).
The machine will automatically start performing a wash cycle. The screen will display "REMOVE THE BREW GROUP AND RINSE IT WITH WATER" when the wash cycle is completed.
Remove the brew group (screen will display "INS. BREW GROUP").
Wash the brew group under running water.
Reinstall the brew group (screen will display "CLOSE SERV. DOOR"), then close the door. (Fig. 2).
When the screen displays "RINSING COMPLETED PRESS OK", press the OK button.
Remove and empty the drip tray, then reinstall it. Do not drink this water.

Important Usage Notes:

Idearestyle: "Use only coffee machine-specific products. Follow the dosing directions on the product packaging."
Conceptto Evo: "Use only milk system and coffee machine-specific products. Follow the dosing directions on the product packaging. Make sure to mechanically remove all visible residues and films."
Idearestyle: "The different wash cycles listed below do not replace the need to disassemble the components for regular sanitization." This emphasizes that automated cleaning cycles are supplementary to manual cleaning.

Maintenance Features

Cleaning Milk Components (Conceptto Evo): The Conceptto Evo machine requires specific steps for cleaning milk components:

Remove the upper protection cover by pulling it outwards.
Remove the fork and the crema adjusting lever.
Unscrew the lower knob to remove the lower protection cover.
Remove the fitting connecting the milk tube to the Cappuccinatore connector, then remove the milk dispensing spout and the milk tube.
Remove the Cappuccinatore casing and the Cappuccinatore body cap.
Remove the temperature adjusting lever.
Remove the coffee dispensing spout by pulling it outwards and dismantle it.
Wash all parts in cleaning solution using a small brush.
Rinse with running water and thoroughly dry all the parts.
Reinstall all parts in reverse order.

Tubes Cleaning Cycle (Conceptto Evo): The Conceptto Evo also has a "TUBES CLEANING CYCLE":

Immerse the milk tube into a container with water and press on the Milk button. (Fig. 1).
During the cleaning cycle process, clean the cooling unit with a soft cloth. (Fig. 2).
At the end of the cycle, remove and empty the container. Do not drink this water.
Replace the milk tube inside the cooling unit.

Recommended Cleaning Products:

Idearestyle: CAFIZA tablets from Urnex, or equivalent cleaning product. Evoca recommends using CAFIZA tablets from Urnex, or equivalent cleaning product. Make sure to always follow the product manufacturer's instructions. Product code: 20ACC22.
Conceptto Evo: Milk System Cleaning Tablets from Evoca, or equivalent cleaning product. Evoca recommends using Milk System Cleaning Tablets from Evoca, or equivalent cleaning product. Make sure to always follow the product manufacturer's instructions. Product code: 962961.

General Maintenance Advice:

Idearestyle: "Use only coffee machine-specific products. Follow the dosing directions on the product packaging."
Conceptto Evo: "Use only milk system and coffee machine-specific products. Follow the dosing directions on the product packaging. Make sure to mechanically remove all visible residues and films."
Conceptto Evo: "Do not use hot water." for the tubes cleaning cycle.
Conceptto Evo: "Make sure the milk tube is correctly positioned so it is supplied with milk."

Both manuals emphasize the importance of using specific cleaning products and following manufacturer instructions for both the machine and the cleaning agents to ensure optimal performance and longevity of the device. Regular cleaning, including both automated cycles and manual disassembly and washing, is crucial for maintaining hygiene and functionality.