evoJet B90 – B130vx – B160vx – Instructions 4.0
6:TEST-DEVICES Menu
To enter the 6:TEST-DEVICES menu, first press the SET key and then use the Up/Down keys to
switch between the available test functions.
To activate a test function, first press the SET key and then use the Up/Down keys to test the
individual system components (devices). A ? indicates the value to be set. To finish the test, press
the SET key again.
To quit the 6:TEST-DEVICES menu and to return to the SETUP menu, press the SET key for more
than 2 seconds (ESC).
The operating status display appears automatically after 20 seconds, or press the SET key for
more than 2 seconds (
>>>
changes to
<<<
, ESC).
28
To Next Page