Need help?Do you have a question about the Evolite EVO SPOT 90 and is the answer not in the manual?
General| Type | Moving Head Spot |
|---|---|
| Light Source | 90W LED |
| Pan | 540° |
| Tilt | 270° |
| Color Wheel | 7 colors + open |
| Control Modes | DMX512, Master/Slave, Auto, Sound |
| Power Consumption | 150W |
| Power Supply | AC 100-240V, 50/60Hz |
| Gobo Wheel | 6 gobos + open |
| Effects | Strobe, Dimmer |
Warning of hazardous voltage, hot surfaces, and fire risks requiring careful handling.
Avoid direct beam exposure and overheating; use proper installation.
Must be installed by professionals, with secure rigging supporting 10x weight.
Key specifications including DMX channels, pan/tilt range, LED type, and connectors.
Proper overhead rigging requires extensive experience and secure installation for safety.
Guidelines for connecting the fixture using XLR cables and understanding pin assignments.
Navigate and configure device settings like address, mode, and display via the control panel.
Details on 15 DMX channels for controlling Pan, Tilt, Color, Gobo, and effects.
Connect multiple units for synchronized operation using DMX daisy-chaining.
Guidelines for cleaning optics and fixture exterior to maintain performance.
To Next Page
