AI-837-00
Adult assembly required.
Small parts may present choking hazard prior to assembly.
Enclosed please nd simple step-by-step instructions to help you quick assemble your product. Before you begin, we recommend
that you follow the steps below:
1. Please read the instructions thoroughly
2. Identify all parts and hardware
3. You may need to provide the following tools:
Philips Head screw driver
Flat head screw driver
Hammer
Do Not Use Power Drills Or Drivers
To protect your parts during assembly please please place them on a soft surface. To clean surface, use only water on a damp cloth.
Do not use window cleaner or cleaning abrasive as it will scratch the surface and could damage the protective coating.
ASSEMBLY INSTRUCTIONS-Instructions pour l'assemblage
ÉVOLUR - 1532 S WASHINGTON AVE U 2, PISCATAWAY TWP NJ 0854, Tel: (908) 791-0555
To Next Page
Loading...
