Evolution DISC CUTTER - Safety Labels and Symbols; Understanding Product Symbols

5
www.evolutionpowertools.com
EN
If any of the symptoms become evident, seek
immediate medical advice.
• Themeasurementandassessmentof
human exposure to hand-transmitted
vibration in the workplace is given in:
BS EN ISO 5349-1:2001 and
BS EN ISO 5349-2:2002
• Manyfactorscaninfluencetheactual
vibration level during operation e.g. the
work surfaces condition and orientation
and the type and condition of the machine
being used. Before each use, such factors
should be assessed, and where possible
appropriate working practices adopted.
Managing these factors can help reduce
the effects of vibration:
Handling
• Handlethemachinewithcare,allowing
the machine to do the work.
• Avoidusingexcessivephysicalefforton
any of the machines controls.
• Consideryoursecurityandstability,
and the orientation of the machine
during use.
Work Surface
• Considertheworksurfacematerial;its
condition, density, strength, rigidity and
orientation.
£ WARNING: The vibration emission during
actual use of the power tool can differ from
the declared total value depending on the
ways in which the tool is used. The need
to identify safety measures and to protect
the operator are based on an estimation
of exposure in the actual conditions of use
(taking account of all parts of the operating
cycle, such as the times the tool is switched
off, when it is running idle, in addition to
trigger time).
(1.8)
LABELS & SYMBOLS
£ WARNING: Do not operate this machine if
warning and/or instruction labels are missing
or damaged. Contact Evolution Power Tools
for replacement labels.
Note: All or some of the following symbols
may appear in the manual or on the product.
SYMBOL DESCRIPTION
V Volts
A Amperes
Hz Hertz
Min
-1
Speed
~ Alternating Current
n
o
No Load Speed
Warning!
Read Instructions
Drt Cutting Only
Wear Safety Goggles
Wear Ear Protection
Wear Dust Protection
Wear Safety Gloves
Wear Safety Boots
US Certification
CE Certification
Waste Electrical &
Electronic Equipment