www.evolutionsteel.com
3
Original
Instruction
Manual
Read instructions before operating this tool.
GB
TABLE OF CONTENTS GB
EC - Declaration of Conformity p3
Important Information p4
12 Month Limited Warranty p4
General Safety Rules p4
Health Advice p5
Specific Safety Rules p6
Additional Safety Advice p6
Labels & Symbols p7
Specifications p7
Assembly p8
Getting Started p9
Operating Instructions p10
Operating Advice p10
Maintenance p11
Environmental Protection p11
Service Parts Diagram p12
Original Instructions
This instruction manual was originally written
in English.
EC - DECLARATION OF CONFORMITY GB
We, manufacturer and importer
Evolution Power Tools Ltd.
Venture One
Sheffield
S20 3FR
Declare that the product
Part numbers: EVO42
Evolution: EVO42
42mm Magnetic Drilling System
Complies with the essential requirements of the
following European Directives:
2006/42/EC – Machine Directive
2006/95/EC – Low Voltage Directive
2004/108/EC – EMC Directive
2002/95/EC – Restriction of the use of Certain
Hazardous Substances in Electrical and Electric
Equipment
The following standards have been applied:
EN55014-1 : 2006
EN55014-2 : 1997+A1+A2
EN61000-3-2 : 2000
EN61000-3-3 : 1995+A1+A2
EN61029-2-9 : 2002
EN60825-1 : 1994+A1+A2
EN61029-1:2009
EN ISO 12100-2/A1:2009
ISO 12100-2:2003
All documentation is held on file at the above
address and is available, on request for review.
Authorised Signatory
Date: 21/10/2011
Mr Matthew J Gavins
Managing Director
To Next Page
Loading...
Need help?
General
