30
www.evolutionpowertools.com
EC DECLARATION OF CONFORMITY
In accordance with EN ISO 17050-1:2004
The manufacturer of the product covered by this Declaration is:
Evolution Power Tools, Venture One, Longacre Close, Holbrook Industrial Estate, Sheeld, S20 3FR
The manufacturer hereby declares that the machine as detailed in this declaration fulls all the
relevant provisions of the Machinery Directive and other appropriate directives as detailed below.
The manufacture further declares that the machine as detailed in this declaration, where
applicable, fulls the relevant provisions of the Essential Health and Safety requirements.
The Directives covered by this Declaration are as detailed below:
2006/42/EC. Machinery Directive.
2006/95/EC. Low Voltage Equipment Directive.
2004/108/EC. Electromagnetic Compatibility Directive.
93/68/EC. The CE Marking Directive.
2011/65/EU. The Restriction of the Use of certain Hazardous
Substances in Electrical Equipment (RoHS) Directive
2002/96/EC The Waste Electrical and Electronic Equipment (WEEE) Directive.
as amended
by 2003/108/EC.
And is in conformity with the applicable requirements of the following documents:
EN55014-1:2006+A1 • EN55014-2:1997+A1+A2 • EN61000-3-2:2006+A1+A2
EN61000-3-3:2008 • EN61029-1:2009+A11 • EN61029-2-1:2010
Product Details
Description: 255mm 10” TCT MULTIPURPOSE TABLE SAW
Evolution Model No: RAGE52551, RAGE52552, RAGE52552EU
Brand Name: EVOLUTION
Voltage: 110V - 230-240V
Input: 50Hz
The technical documentation required to demonstrate that the product meets the requirements
of directive has been compiled and is available for inspection by the relevant enforcement
authorities, and veries that our technical le contains the documents listed above and that
they are the correct standards for the product as detailed above.
Name and address of technical documentation holder.
Signed: Print: Steven Bulloss: Operations Director
Signed: Print: Lettie Lui: Product Manager
Date: 18/04/2011
To Next Page
Loading...
Need help?
General
