EasyManua.ls Logo

Evolution X - Evolution-X Type-C Starter Kits; Filling Evolution-X Cartridges with E-Liquid

Evolution X
7 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Your Mega Evolution-X is now assembled and ready for use!
Evolution-X Type-C Starter Kits
Evolution-X Type-C electronic cigarettes have five pieces:
1. An Evolution-X Battery : It is the longest piece and has a button on it.
2. A Type-C Atomizer Head : It is metal, silver, approximately ⅜ of an inch long, and is pointy on
one side with a flat cylindrical shape on the other end.
3. A Type-C Cone : This is meta,l cone-shaped, hollow and approximately 1½ inches long. When
you first get your Evolution-X Type-C Starter Kit, the silver Adapter Ring will be screwed onto
the bottom threads of the Type-C cone.
4. A Type-C Atomizer Adapter Sleeve : This is a silver, metal piece that had screw threads on both
ends. When you first get your Evolution-X Type-C Starter Kit, the silver Adapter Ring will be
screwed onto the bottom threads of the Type-C cone.
5. A Type-C Tank Cartridge : It is plastic, relatively clear in color, about 1½ inches long and has a
wide flat mouthpiece.
Assembling an Evolution-X Type-C Starter Kit isn't all too difficult once you know how all of the parts
fit together. Here's how it's done:
1. When you receive your Evolution-X Type-C Starter Kit, the silver atomizer sleeve is already
screwed onto the cone. Unscrew the silver adapter sleeve off of the bottom of the cone.
2. Screw the silver adapter sleeve onto your your Evolution-X battery. There's only one way these
two parts can screw together (you'll figure it out).
3. Remove one of the Type-C atomizer heads from its hermetically sealed package and place the
flat side of the atomizer head into the silver adapter sleeve, on top of your Evolution-X battery.
It should seat perfectly in the center with the pointy side of the atomizer head sticking up.
4. Place the widest part of the Type-C cone over the atomizer head and screw it onto the silver
adapter sleeve. This will lock the atomizer head into place.
5. Unwrap one of the three Type-C tank cartridges that came with your Evolution-X Starter Kit.
All of our Evolution-X Type-C Starter Kits come with unfilled cartridges and a bottle of e-
liquid that you us to fill the tank cartridges. Please see the section, below, about how to fill your
Evolution-X e-cigarette cartridges. Once you have filled your cartridge, simply push it onto the
open end of the cone (the other end should already be screwed onto the battery).
IMPORTANT: You should always take five drags from your e-cigarette without pressing the button
when using a new Type-C atomizer head in order to prime it. After taking the five "dry" puffs, you can
press the button and use your e-cigarette.
Your Evolution-X Type-C is now assembled and ready for use!
Filling Your Evolution-X Cartridges with E-Liquid
E-Liquid (also commonly referred to as "e-juice" or "liquid nicotine") is what creates the vapor that
you inhale. When you receive any of our Evolution-X starter kits, there is no e-liquid in any of the
cartridges, regardless of the type of starter kit that you purchased. This is because we think everyone
should be able to select whatever flavor and nicotine strength that they like, so all of our kits come with

Related product manuals