Evolveo FIGHTER F1 - Vibration and Other Problems

detected by the
computer
2. The voltage in the USB port USB port is not sufficient
3. Try another USB port
Gamepad does not work
properly in the game
1. The game does not support gamepad
2. Set the gamepad buttons correctly
Gamepad does not
vibrate
1. The game does not support vibration
2. Android games do not support vibration
Other problems
1. If it is impossible to turn the gamepad on, the batteries may
be flat, recharge them.
2. If the gamepad got "frozen", disconnected or an incorrect
behaviour appeared, reset the device to the factory settings
by pressing the RESET button on the bottom of the gamepad
and pair it again.
3. Gamepad will not work properly if you want to pair via
Bluetooth, but it has been paired via 2.4 GHz already and wise
versa. It is always necessary to terminate the pairing, if you
want to pair the device again.
Do you still need advice after reading this manual?
Firstly, read the FAQ at www.evolveo.com/en/fighter-f1 or contact
EVOLVEO technical support at www.evolveo.com/en/support