67
2.18. Adding the Device to the Application
2.18.1. In the camera menu, select “Síť” (Network), confirm
“OK” and then select Device ID – a QR code containing
the device’s IMEI (International Mobile Equipment
Identity) will open.
2.18.2. Open the EVOLVEO CAM app on your mobile phone. In
the upper left corner, press the “+” button and scan the
QR Code from the camera display. If for any reason you
cannot scan the QR code into your phone, you can
enter it manually, in the application at the bottom
select „Zadejte ID zařízení“ (Enter device ID), enter the
IMEI of the device as the ID, which can be found on the
label on the camera or in the menu above the QR code
of the device ID. It is a 15-digit number.
2.18.3. Fill in the name of the device. This name will then be
displayed in notifications and as the camera name in
the Application menu. Then fill in the password to
access the camera Cloud. For a new device, the default
password is set to “123456”. After successfully logging
in to the application, changing the default password is
recommended.
2.19. ACTIVATION: If everything is set to activate the device,
turn the main switch to the ON position. The device on the
display starts the countdown and the red LED above the
camera lens starts blinking on the front panel. As soon as the
LED stops blinking, the camera is operational and starts
taking pictures based on the settings.
To Next Page
Loading...
