Evolveo StrongVision PRO - ISO, Rewrite, and PIR Sensitivity

78
9. Sequence
In the Photography, Photo
& Video and Timelapse
mode, it sets the number
of photos taken at the
moment of the camera
activation. Following
number can be set: 1, 3, 6
or 9 photos
10. ISO
ISO sensitivity, simply put,
the darker the
surroundings, the higher
value. If unsure of the
settings, leave it in the
automatic mode. Following
number can be set:
Automatic, ISO 100, ISO
200, ISO 400, ISO 800 a ISO
1600
11. Rewrite
On – The oldest files are
rewritten when the SD
card is full.
Off – New photos are not
saved when the SD card is
full.
12. PIR Sensitivity
Sensor PIR sensitivity
settings. If unwanted
activation by remote
objects occurs, the sensor
sensitivity can be reduced.
Following number can be