> This confirmation code must be entered in the AirKey Online Administration within
10 minutes and confirmed with Activate.
Figure 208: Activate event log viewing – confirmation code
If this process is not completed within 10 minutes, the process must be repeated. If
the selected system administrator does not respond, another system administrator
can also be selected via the Select administrator link to activate event log viewing.
Afterwards the media event log will be displayed.
The activation of the event log viewing is valid until the next logout of the
system administrator. This means that both the locking component event
log and the media event log can be viewed as often as you like.
To Next Page
Loading...