AirKey system manual version 2.7 |
06/03/2024 | Subject to technical changes and misprints
Please note that one AirKey control unit each is required to operate one
AirKey wall reader.
AirKey wall reader and control unit combinations can be used to operate electronic locking
elements, such as motorised cylinders, sliding and swinging doors, etc.
It is also possible to connect an external enable element (button) to the
control unit. Press it and the door opens as it would when accessing the
door using the reader unit. However, opening the door using the external
release element will NOT be logged. For security reasons please note that it
is consequently possible to access AirKey systems with third-party systems
without creating an entry in the event log.
Please check carefully to make sure the AirKey product you selected is suitable for your
intended application / assembly situation. We have made the required data sheet, the
product catalogue or assembly manual available in the download section of our homepage:
https://www.evva.com/en/downloads/.
3.2 AirKey app
EVVA provides the AirKey app in the Google Play
Store or Apple App Store free of charge.
The AirKey app is required to operate locking components with your smartphone. You can
also use your smartphone to add or update locking components and media to your access
control system. Most AirKey app features require an active Internet connection. However,
locking components can also be operated offline.
Internet connections may incur extra charges. For this purpose, please note
your provider agreement.
3.3 Smartphones
Smartphones must meet the following minimum requirements for use in access control
systems:
> Smartphone featuring NFC or Bluetooth 4.0 (Bluetooth Low Energy/BLE)
> Operating system:
• Android™ from 5.0 (NFC functionality available only)
• Android™ from 6.0 (NFC and Bluetooth)
• Apple™ from iOS 10 (Bluetooth functionality available only)
> AirKey app from Google Play Store or Apple App Store
> Android smartphones require "Access telephone status and identity" authorisation
and location services must have been enabled.
To Next Page
Loading...