eWON Flexy 205 User Manual

Quick start guide
eWON Flexy 205
eWON Flexy uses a default xed IP
address (10.0.0.53, Mask: 255.255.255.0).
To change it for network compatibility,
follow the steps on reverse side.
L’eWON Flexy utilise une adresse
IP xe par défaut (10.0.0.53, Masque:
255.255.255.0). Pour la changer et la
rendre compatible avec votre réseau,
suivez les étapes au verso.
Standardmäßig verwendet der eWON
Flexy eine feste IP-Adresse (10.0.0.53,
Maske: 255.255.255.0). Falls diese nicht mit
ihrem Netzwerk kompatibel ist, folgen Sie
den Schritten auf der Rückseite.
El eWON Flexy utiliza una dirección
IP ja predeterminada (10.0.0.53,
máscara: 255.255.255.0). Para cambiar
la IP por una compatible a tu red, Sigue
los pasos al reverso.
1

eWON Flexy 205 Specifications

General

Product Name	eWON Flexy 205
Category	Gateway
Certifications	CE, UL, FCC
Serial Ports	1
USB Ports	1 USB 2.0
Expansion Slots	2
Operating Temperature	-20°C to +60°C
Power Supply	12-24 VDC
WAN	Ethernet
LAN	Ethernet
Protocols	Modbus TCP, Modbus RTU, OPC UA, MQTT
VPN	OpenVPN
Wi-Fi	Optional
Cellular Connectivity	Optional
Security	Firewall, VPN
Ethernet Ports	2

Summary

eWON Flexy 205 Quick Start Guide

Default IP Address Configuration

Details the default fixed IP address for the eWON Flexy 205 and how to change it.

Initial Setup Procedures

Connect Power Supply

Connect the 12-24 VDC power supply to the eWON Flexy unit.

Link PC to LAN Port

Connect your PC to the LAN port #1 of the eWON Flexy.

Launch Web Browser

Open your web browser and navigate to the eWON Flexy's IP address.

Device Access and Configuration

Login Interface

Access the eWON Flexy using the login screen with default credentials.

Quick Launch Wizard

Start the Quick Launch Wizard for initial setup and remote access configuration.

Important Installation Precautions

Power Off Before Card Insertion

Ensure the eWON Flexy is powered off before inserting any extension cards.

Consult Installation Guide

Refer to the Flexy 205 Installation Guide for mounting, safety, and security requirements.

Changing the eWON Flexy IP Address

Download Maintenance Utility

Download and install the eWON maintenance utility from the support website.

Launch eBuddy IP Wizard

Start eBuddy and launch the 'Set IP Address' wizard.

Identifying the eWON Flexy

Enter Serial Number or Browse

Enter the serial number or use the browse button to find your eWON on the network.

Configuring the New IP Address

Set New IP and Subnet Mask

Enter the new IP address and subnet mask for the eWON Flexy.

Wait for Reboot

Wait for the eWON Flexy to reboot after the IP address change.

Accessing the eWON Flexy

Access via Web Browser

Use your web browser to access the eWON Flexy's internal web pages with the new IP.