Need help?Do you have a question about the eWON eWON500 and is the answer not in the manual?
General| Model | eWON500 |
|---|---|
| Connectivity | Ethernet, Cellular (Optional) |
| WAN Interface | Ethernet, Cellular (Optional) |
| LAN Interface | Ethernet |
| Security | Firewall, VPN, User Authentication |
| Power Supply | 24 VDC |
| Protocols Supported | Modbus TCP, OPC UA, MQTT, HTTP |
| Data Logging | Yes |
| Certifications | CE, UL |
Describes initial power-on, connection, and accessing the eWON500 via web browser.
Explains the transparent function of transmitting data streams between serial and TCP interfaces without understanding frame content.
Details configuration of the eWON500's serial port for RS-232 or RS-485 modes using dip-switches.
Introduces IO servers as drivers enabling the eWON500 to communicate using PLC protocols.
Guides hardware dip-switch settings and IO server configuration for UNITELWAY/XIP.
Details PLC software configuration, including destination node and Unitld for XIP driver.
Covers dip-switch settings for RS485 and Modbus IO server configuration for ModbusRTU/TCP.
Explains PLC software configuration using the eWON IP address as the destination node.
Details RS232 dip-switch settings and DF1 IO server configuration for DF1/EIP gateway.
Guides RSLinx Ethernet driver configuration and GoOnline process for DF1/EIP.
Covers RS232 dip-switch settings and FINS IO server configuration for FINS Hostlink/TCP.
Explains PLC software configuration by matching data with CX-Programmer and going online.
Addresses the primary troubleshooting step: verifying serial connection to the PLC.
Details how to create eWON Tags to validate the serial connection and troubleshoot communication.
Provides examples of eWON Tags for different protocols and how to read their values on the PLC.
Details serial port dip-switch settings and troubleshooting for RS232/RS485 communication.
Explains how to use diagnostic status, logs, and event logs to identify and resolve system problems.
To Next Page
