Ex-Or RB2000LT - User Manual

W4159C
Technical Data
2
MLS CABLE: 1.5mm unscreened twisted-pair: see Application Note AN4001
2
SWITCH INPUT CABLE: Any mains-rated cable, e.g. 0.5mm two-core
OPERATING VOLTAGE: 230V 50Hz (UK & Europe)
PRODUCT RATING & RECOMMENDED CIRCUIT PROTECTION: 10 Amps
POWER CONSUMPTION: <10W
MAX DEVICES PER RB2000LT: 100 (MLSLCP4 counts as 2 nodes)
WEIGHT: 112g
SIZE: 175mm x 125mm x 75mm
(Please read these instructions fully before installation)
RB2000LT
MLS Bus Power Supply - ‘Lite’
Installation and Commissioning
Instructions
Ex-Or
Haydock Lane, Haydock, Merseyside WA11 9UJ
Tel: +44 (0)1942 719229
Fax: +44 (0)1942 272767
Email: technicalsales.ex-or@honeywell.com
www.ex-or.com
At the end of their useful life
the packaging and product
should be disposed of via a
suitable recycling centre.
Do not dispose of with normal
household waste.
Do not burn.

Summary

RB2000 LT MLS Bus Power Supply - Lite

Technical Data

Key specifications including cable, voltage, power consumption, weight, and dimensions.

Installation and Commissioning Instructions

Provides guidance for the proper setup and operation of the RB2000LT unit.

Detailed Installation and Operation

Fixing and Mounting

Guidance on securely mounting the RB2000LT in its protective housing.

Connection Procedures

Instructions for wiring the MLS bus, switch inputs, and power supply correctly.

Important Additional Notes

Crucial points regarding terminal use and wiring regulations compliance.

Commissioning Modes

Explanation of the unit's two operational modes and DIL switch settings.

Ex-Or RB2000LT Specifications

General

Brand	Ex-Or
Model	RB2000LT
Category	Power Supply
Language	English