EXATAPE 160m XL 8mm Data Cartridges
The EXATAPE 160m XL 8mm Data Cartridge is intended for
use in the EXB-8502XL and EXB-8505XL only. The 160m XL
tape is equipped with a Recognition System stripe, located
onthetapeleader,thatenablestheXLtapedrivetorecognize
the tape as data-quality metal-particle media. To prevent the
use of inappropriate media, the EXB-8205XL and EXB-8505XL
do not accept 160m tapes without the Recognition System
stripe. If you attempt to load a 160m tape without this stripe,
the XL tape drive automatically ejects it.
The EXB-8205 and EXB-8505 do not support the 160m XL
tape. If you attempt to load any 160m data cartridge into an
EXB-8205 or EXB-8505, the tape drive automatically ejects
the cartridge.
CAUTION
Do not attempt to use the 160m XL Data Cartridge in
the following Exabyte tape drives: EXB-8200,
EXB-8200SX, EXB-8500, or EXB-8500c. Although these
drives will accept the 160m XL cartridge, these
cartridges are not supported by these drives and
should not be used.
Compatibility of EXATAPE 8mm Data Cartridges
Table 3 summarizes the compatibility of EXATAPE 8mm
Data Cartridges with Exabyte 8mm tape drives.
EXATAPE 8mm Data Cartridge
15m 54m 112m 160m XL
EXB-8205
and
EXB-8505
444
Not supported
(automatically
ejected)
EXB-8205XL and
EXB-8505XL
444 4
EXB-8200 and
EXB-8200SX
444
Not supported
EXB-8500 and
EXB-8500c
444
Not supported
Table 3 Compatibility of EXATAPE 8mm Data Cartridges and
24
EXB-8205 and EXB-8505 (Standard and XL) 302967
To Next Page
Loading...
