Exabyte EXB-8205 - Appendix C Tape Drive Specifications

Appendix C Tape Drive Specifications
General
Interface SCSI-1 and SCSI-2, single-ended
or differential
Mean time between failure 160,000 hours
Physical Characteristics
Form factor 5.25-inch half-high
Size
4.1 cm high 14.6 cm wide
20.3 cm deep
(1.62 5.75 8.00 inches)
Weight 1.2 kilograms (2.6 pounds)
Environmental
Operating temperature
+5°Cto+40°C(+41°Fto+104°F)
Operating Rel. humidity 20% to 80%, non-condensing
Maximum Sustained Data Transfer Rate
8200 format
8200c format
a
8500 format (EXB-8505)
8500c
a
format (EXB-8505)
262 KB/sec
500 KB/sec
500 KB/sec
1.0 MB/sec
Capacity on EXATAPE 112m Data Cartridge
8200 format
8200ca format
8500 format (EXB-8505 and
EXB-8505XL)
8500c
a
format (EXB-8505
and EXB-8505XL
)
Up to 2.5 GB
Up to 5.0 GB
Up to 5.0 GB
Up to 10.0 GB
Capacity on EXATAPE 160m XL Data Cartridge
(XL Tape Drives Only)
8200 format
8200ca format
8500 format (EXB-8505XL)
8500c format (EXB-8505XL)
a
Up to 3.5 GB
Up to 7.0 GB
Up to 7.0 GB
Up to 14.0 GB
Power
Supply voltages
Standard +5 VDC and +12 VDC ±5%
Maximum current 2.8 Amps (single), 3.2 Amps (differ)
at +5 VDC; 1.6 Amps at +12 VDC
Operating power
consumption
14.5 watts (single-ended)
16.5 watts (differential)
a
Assuming a 2:1 compression ratio
44
EXB-8205 and EXB-8505 (Standard and XL) 302967