15
Factors influencing blade lifespan:
Pipe material
Blade suitability for the pipe material
Correct motor speed setting
Pipe wall thickness
Feed rate
Smoothness of the pipe
General user knowledge
Cleanliness of the pipe
Corrosion on pipe
Weld seam on the pipe
Blade speed
Factors influencing straightness of cutting:
Blade condition
Pipe wall thickness
Feed rate
Smoothness of feed
General user knowledge
Cleanliness of the pipe
Pipe circumference
Too loose or tight gripping device
Too tight blade
Extra equipment 280 – 360 – 460 PS
Protection cover with vacuum cleaner connection for
plastic cutting.
FIGURE P
Blade suitability
Exact TCT: Suitable for cutting steel and all kinds of
plastic pipe material. Exact TCT saw blades can be
sharpened.
Exact Cermet: Suitable for cutting stainless steel
and acid proof materials, steel, copper, aluminum
and all kind of plastic pipe materials.
Exact ALU: Suitable for cutting aluminum and all
kinds of plastics. Exact CERMET ALU saw blades
can be sharpened.
Exact Diamond: Suitable only for cutting cast and
ductile iron pipe materials, also for concrete lined
cast iron pipes. Exact DIAMOND X discs cannot be
sharpened.
Exact TCT 140
Exact Cermet 140
Exact ALU 140
Exact Diamond X 140
Exact TCT 165
Exact Cermet 165
Exact ALU165
Exact Diamond X 165
Exact Cermet 180
Exact ALU 180
Exact Diamond X 180
Exact Plastic 190
Due to continuous product development, the present manual may be modified. No changes will be reported
separately.
For more information check www.exacttools.com
To Next Page
Loading...
