2
Contents
Information
Technical data 4
Package contents 5
Safety
Safety instructions 6
Operation
Functional description 8
Product features 8
Before operating the tool 9
Connection to mains power supply 9
Setting the pipe on supports 9
Attaching the pipe saw to the pipe 9
Piercing the pipe wall 10
Cutting around the pipe 10
Overload protection and RPM adjustment 11
Explanation if indicator lights 11
Improving possible misalignment of the cut 11
Cutting result adjustment on Exact PipeCut 12
280 / 360 / 460 Pro Series
Installing and changing the blade 13
Maintenance and servicing instructions 13
Environment / disposal 14
Guarantee / guarantee conditions 14
Tips for using Exact PipeCut saws 14
Extra equipment 15
Theoretical cutting depths 16
Declaration of Conformity
We declare under our sole responsibility that the pipe cutting machines
Exact PipeCut 280 Pro Series / 360 Pro Series / 460 Pro Series
Described under” Technical Data” are in conformity with the following standards or standardization
documents:
IEC 62841-1:2014, IEC 62841-2-5:2014, EN 62841-1:2015, EN 62841-2-5:2014, EN 55014-1,
EN 55014-2, EN 61000-3-2, EN 61000-3-3
according to the technical provisions of the directive 2006/42/EC
These are the original operating instructions.
For more information, please contact Exact Tools at the following address:
The technical file is available at the address underneath:
The person authorized to compile the technical file:
Seppo Makkonen, chairman of the board (seppo.makkonen@exacttools.com)
Helsinki, 01.02.2018
Seppo Makkonen, chairman of the board, Exact Tools Oy
Särkiniementie 5 B 64
FI-00210 Helsinki, Finland
To Next Page
Loading...
