Safety
6
Edition 04/09.2002 EXAKT 35 / 50
Warning plates or labels are applied to the unit housing to
ensure safer operation.
Observe all safety instructions. Compliance with these
instructions is in the interest of personal safety.
Before setting-up the unit, the operator must ensure that all
safety-related requirements have been met.
All applicable accident prevention regulations as well as other
generally recognised regulations concerning workplace health
and safety must be observed.
3.2 Installation site
The unit must be positioned upright.
The installation location must provide firm support for the unit.
Warning – Product or component damage!
Do not place any objects on top of the unit.
!" Check the main power cord and plug for signs of damage
prior to connecting the unit.
Warning – Danger of damage to the unit due to an incorrect
supply voltage!
Only connect the unit to the electrical supply voltage indicated
on the unit’s rating plate. Only connect it to a properly installed
and grounded outlet.
Compare the main power voltage with the unit voltage indicated
on the rating plate prior to connecting the unit.
When selecting an installation site, the applicable safety
regulations and manufacturer’s instructions concerning
substances used for or located near the unit must be observed.
To Next Page
Loading...
